GDI Induction cleaner Air system, EGR, Valves, Turbo Cleaner From Moto – MotorPower Care
Induction, Air Intake System Cleaner, GDI Product properties: This the latest generation of our specially designed product for the air intake system. Developed for use in both fuel injection systems and engines with exhaust gas recirculation or “EGR”. This product thoroughly cleans the entire system starting from the
Preparation:
1- Ensure Safety: Wear appropriate personal protective equipment (PPE), including safety goggles and gloves, as needed.
2- Vehicle Warm-Up: The engine must be warmed up to its operating temperature before beginning the cleaning process. It is recommended to let the engine run for a few minutes to achieve this.
3- Access Port: Identify the access port on the intake manifold for the air intake system cleaning. If there is no dedicated access port, use an S-shaped nozzle that can reach under the air intake boot just before the throttle body. Ensure that the air intake system is cool to the touch before proceeding.
Cleaning Procedure:
Pressure Setting: Set your air intake cleaning device to pressurize the canister containing MotorPower Care Induction & Air Intake System Cleaner to a pressure range between 25 to 35 psi. Ensure that the device is properly calibrated for this pressure.
1- Engine Start, RPM Adjustment: Set the engine's RPM to approximately 2500 RPM. The cleaning process should be carried out with the engine running.
2- Atomization: Begin atomizing the MotorPower Care Induction & Air Intake System Cleaner into the air intake system through the access port on the intake manifold or using the S-shaped nozzle before the throttle body. Ensure that the product is evenly distributed into the system.
3- Cleaning Cycle: Continue atomizing the product into the air intake system while maintaining the RPM at around 2500.
4- RPM Increase: After three minutes stop atomizing the product and increase the engine's RPM to approximately 5000 RPM for a brief period (a few seconds).
5- Repeat: Restart the atomization process, maintaining an engine RPM of around 2500 for another three minutes. Repeat this cycle until the entire contents of the product canister have been used.
Note for Direct Injection Vehicles:
Direct Injection (DI): If you are working on vehicles equipped with direct injection (especially German cars), it is recommended to use two bottles of MotorPower Care Induction & Air Intake System Cleaner – GDI for a more effective cleaning process.
Fuel System Cleaner: Consider using our MotorPower Care Fuel System Cleaner by adding it to the gasoline tank, this will help eliminate carbon build-up.
Safety Precautions:
Follow all safety guidelines provided by your air intake cleaning device manufacturer.
Ensure good ventilation in your workspace, as fumes may be generated during the cleaning process.
Avoid excessive contact with the product and use in a well-ventilated area.
Always follow local regulations and disposal guidelines for automotive cleaning products.
Please refer to your specific air intake cleaning device's manual for any device-specific instructions or precautions. Proper disposal of the product container and any residue should also be conducted in accordance with local regulations.
Warning: This product is for professional use only. Keep out of reach of children. If ingested, seek medical attention immediately. In case of contact with eyes or skin, rinse thoroughly with water and seek medical advice if irritation persists. Do not expose the product to open flames or high temperatures.
For any additional information or technical support, please get in touch with our customer service team at: Info@
Exhaust Gas Recirculation (EGR) Cooler - 2015 BMW 7 Series & 2014-2017 X5
Turbo & EGR Cleaner l For dissolving contamination in EGR valve 500ml - AB Marine service
EWK Fuel Injection Cleaner Canister Vacuum System Cleaner Intake Valve Pressure Tester : Automotive
Motor Power Care Advanced Carbon Cleaner for Gasoline & Diesel Engines - Removes Carbon Deposits, Improves Performance & Efficiency - Safe for Use
EWK Fuel Injection Service Kit can be used to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Effectively remove engine carbon deposits and increase gas mileage performance.
EWK Tools Fuel Injection Cleaner Canister
True Brand® GDI Complete Clean 2-Step Fuel System Kit is a hotter, more aggressive formula that cleans and attacks the tenacious hard carbon deposits
GDI Complete Clean 2-Step Kit
Safety Recall 21V-907 Exhaust Gas Recirculation (EGR) Cooler - 2013-2017 BMW
Gdi induction system cleanerSpecifications Weight: 1.03 lbs Great Gift Idea. Satisfaction Ensured. Weight: 1.03 lbs
Uview 400-2425 Gdi Induction Cleaner
EWK Fuel Injection Service Kit can be used to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Effectively remove engine carbon deposits and increase gas mileage performance.
EWK Tools Fuel Injection Cleaner Canister
Motor Power Care Advanced Carbon Cleaner for Gasoline & Diesel Engines - Removes Carbon Deposits, Improves Performance & Efficiency - Safe for Use
MotorPower care Carbon Cleaner:, The latest technology formula reaches deep areas, dissolves & removes carbon residues from the cylinder head area
Carbon build-up valves cleaner, foam effective formula, cleans also EGR turbo easy to use, not required disassembling high performance motorpower care
Valve Cleaner Engine
Valve Cleaner Engine
2 x Carbon build up cleaner valves combustion chamber EGR turbo MotorPower care