Raspberry Pi Pico Raspberry Pi Pico (without Headers) — Little Bird

The real story is: Just like another “fruit company”, Raspberry Pi dove headfirst and developed their own custom ARM silicon, the RP2040 (learn more about the RP2040)! Raspberry Pi Pico has been designed to be a low cost yet flexible development platform for RP2040, with the following key features: RP2040 microcontrol

The real story is: Just like another “fruit company”, Raspberry Pi dove headfirst and developed their own custom ARM silicon, the RP2040 (learn more about the RP2040)!

Raspberry Pi Pico has been designed to be a low cost yet flexible development platform for RP2040, with the following key features:

RP2040 microcontroller with 2MByte Flash
Micro-USB B port for power and data (and for reprogramming the Flash)
40 pin 21x51 'DIP' style 1mm thick PCB with 0.1 through-hole pins also with edge castellations
- Exposes 26 multi-function 3.3V General Purpose I/O (GPIO) ◦ 23 GPIO are digital-only and 3 are ADC capable
- Can be surface mounted as a module
3-pin ARM Serial Wire Debug (SWD) port
Simple yet highly flexible power supply architecture
- Various options for easily powering the unit from micro-USB, external supplies or batteries
- High quality, low cost, high availability
Comprehensive SDK, software examples and documentation

For full details of the RP2040 microcontroller please see the RP2040 Datasheet, however the headline features are:

Dual-core cortex M0+ at up to 133MHz
- On-chip PLL allows variable core frequency
264K multi-bank high performance SRAM
External Quad-SPI Flash with eXecute In Place (XIP)
Dual-core cortex M0+ at up to 133MHz
- On-chip PLL allows variable core frequency
264K multi-bank high performance SRAM
External Quad-SPI Flash with eXecute In Place (XIP)
High performance full-crossbar bus fabric
On-board USB1.1 (device or host)
30 multi-function General Purpose IO (4 can be used for ADC)
- 1.8-3.3V IO Voltage (NOTE Pico IO voltage is fixed at 3.3V) • 12-bit 500ksps Analogue to Digital Converter (ADC)
Various digital peripherals
- 2 x UART, 2 x I2C, 2 x SPI, up to 16 PWM channels
- 1 x Timer with 4 alarms, 1 x Real Time Counter • Dual Programmable IO (PIO) peripherals
- Flexible, user-programmable high-speed IO
- Can emulate interfaces such as SD Card and VGA

Pico provides minimal (yet flexible) external circuitry to support the RP2040 chip (Flash, crystal, power supplies and decoupling and USB connector). The majority of the RP2040 microcontroller pins are brought to the user IO pins on the left and right edge of the board. Four RP2040 IO are used for internal functions - driving an LED, on-board Switched Mode Power Supply (SMPS) power control and sensing the system voltages.

Pico has been designed to use either soldered 0.1 pin-headers (it is one 0.1 pitch wider than a standard 40-pin DIP package) or can be used as a surface mountable 'module', as the user IO pins are also castellated. There are SMT pads underneath the USB connector and BOOTSEL button, which allow these signals to be accessed if used as a reflow- soldered SMT module.

Raspberry Pi Pico Microcontroller Board

Raspberry Pi Pico (with Soldered Female Headers)

Raspberry Pi Pico Upgrade Number1 - Snazzy Header Pins!

A Vilros Raspberry Pi Pico kit inspired by the Get Started with the Raspberry Pi Pico. You can get started With PICO using the Get Started with Micro Python on Raspberry Pi Pico book.The Book is book sold separately or can be downloaded for free. Parts & Components 1x Raspberry Pi Pico W 1 × Full Size Solderless breadboard800 HoleSticky Back 1x Holder and Breadboard PanelHolds the Breadboard and Battery Holder in place for an easy and neat wiring experience.

Vilros Raspberry Pi Pico W Project Starter Kit

Maker Pi Pico Mini - Without Raspberry Pi Pico / Pico W (Pre-Soldered Pin Header), Pimoroni

5V UPS USV Modul Breakout Shield HAT Kit für RPI Raspberry Pi PICO W WH RP2040

Raspberry Pi Pico W is a small, quick, and an adaptable board built using the RP2040, a microcontroller chip manufactured by Raspberry Pi

DVOZVO Raspberry Pi Pico W with Pre-Soldered Pin Headers, Raspberry Pi RP2040 Chip, Wi-Fi Wireless Connectivity,Pico WH with USB Cable

RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz. 264KB of SRAM, and 2MB of on-board Flash memory. Castellated module allows soldering direct to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 × multi-function GPIO pins.

Bicool Raspberry Pi Pico with Pre-soldered Header Microcontroller Mini Development Board Based on Raspberry Pi RP2040 Chip,Dual-Core Arm Cortex M0+ Processor