EPever 3210AN 12V/24V MPPT Battery Regulator Charge Controller with Ma – Temank
EPever 1210AN 12V/24V MPPT Battery Regulator Charger Controller with Max PV Input 100v for Solar home System Solar Charge Controller Brand: Temank Apllication: Solar home System, field monitoring, stations, etc Advanced MPPT technology
Solar Charge Controller Brand: Temank
Apllication: Solar home System, field monitoring system, stations System, etc
Advanced MPPT technology, with efficiency no less than 99.5%
Ultra-fast tracking speed and guaranteed tracking efficiency
Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time
Wide MPP operating voltage range
High quality components, perfecting system performance, with maximum conversion efficiency of 98%
Accurate recognition and tracking of multiple-peaks maximum power point
International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product’s service life
Charging power and current limitation function
Compatible with lead-acid and lithium-ion batteries
Battery temperature compensation function
Real-time energy statistics function
Overheating power reduction function
Multiple load work modes
The communication port adopts professional protection chip, which can provide 5VDC power supply, and has over-current and short-circuit protection.
With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.
Monitor and set the parameters via mobile phone APP or PC software
Full-load operation without any drop in capacity within the range of working environment temperature
Extensive electronic protection
★If the temperature sensor is short-circuited or damaged, the controller will charge or discharge at the default temperature setting of 25 ºC.
Maximum Power Point Tracking Technology
Due to the nonlinear characteristics of solar array, there is a maximum energy output point (Max Power Point) on its curve. Traditional controllers, with switch charging technology and PWM charging technology, can’t charge the battery at the maximum power point, so can’t harvest the maximum energy available from PV array, but the solar charge controller with Maximum Power Point Tracking (MPPT) Technology can lock on the point to harvest the maximum energy and deliver it to the battery.
The MPPT algorithm of our company continuously compares and adjusts the operating points to attempt to locate the maximum power point of the array. The tracking process is fully automatic and does not need user adjustment.
As the Figure 1-2, the curve is also the characteristic curve of the array, the MPPT technology will ‘boost’ the battery charge current through tracking the MPP. Assuming 100% conversion efficiency of the solar system, in that way, the following formula is established:
Figure 1-2 is the maximum power point curve, the shaded area is charging range of traditional solar charge controller (PWM Charging Mode), it can obviously diagnose 3that the MPPT mode can improve the usage of the solar energy resource. According to our test, the MPPT controller can raise 20%-30% efficiency compared to the PWM controller. (Value may be fluctuant due to the influence of the ambient circumstance and energy loss.)
In actual application, as shading from cloud, tree and snow, the panel maybe appear Multi-MPP, but in actually there is only one real Maximum Power Point. As the below Figure 1-3 shows:
If the program works improperly after appearing Multi-MPP, the system will not work on the real max power point, which may waste most solar energy resources and seriously affect the normal operation of the system. The typical MPPT algorithm, designed by our company, can track the real MPP quickly and accurately, improve the utilization rate of the array and avoid the waste of resources.
Battery Charging Stage
The controller has a 3 stages battery charging algorithm (Bulk Charging, Constant Charging and Float Charging) for rapid, efficient, and safe battery charging.
A) Bulk Charging
In this stage, the battery voltage has not yet reached constant voltage (Equalize or Boost Voltage), the controller operates in constant current mode, delivering its maximum current to the batteries (MPPT Charging).
B) Constant Charging
When the battery voltage reaches the constant voltage setpoint, the controller will start to operate in constant charging mode, this process is no longer MPPT charging, and in the meantime the charging current will drop gradually, the process is not the MPPT charging. The Constant Charging has 2 stages, equalize and boost. These two stages are not carried out constantly in a full charge process to avoid too much gas precipitation or overheating of battery.
There is detail information about 3210AN 12V/24V MPPT Battery Regulator Charger Controller
EPEVER MPPT Charge Controller 30A, Max PV 100V 12V/390W, 24V/780W, Negative Grounded, LCD Display Work for Lead-Acid Sealed /Gel(AGM)/Flooded and Lithium Battery Charging(MPPT 30A) : Patio, Lawn & Garden
EPever 3210AN 12V/24V MPPT Battery Regulator Charge Controller with Ma – Temank
EPEVER MPPT Solar Charge Controller 30A 12V 24V Auto Tracer3210AN + Remote Meter MT50 + RTS Common Negative Ground Solar Panel Regulator for Lead-Acid Lithium Battery (30A + MT50+RTS)
EPEVER 20A MPPT Solar Charge Controller 12V/24V Auto Working Max PV 100V Modular Design Solar Panels MPPT Regulator with LED&LCD Display Double USB Port for Solar Home System : Patio
EPever 1210AN 12V/24V MPPT Battery Regulator Charger Controller with Max PV Input 100v for Solar home System Solar Charge Controller Brand: Temank
EPever 3210AN 12V/24V MPPT Battery Regulator Charge Controller with Max PV Input 100v For Station System Soluation
EPEVER Tracer 4210AN Series Negative Ground and compatible with Lithium(LiFePO4) Battery Charging. Compatible with 12V or 24V battery system. High
EPEVER 40A MPPT Solar Charge Controller 100V Input Tracer 4210AN with Display Negative Ground Lithium Battery Charger Work with LiFePO4
Negative Ground Charge Controller featuring advanced MPPT technology with high tracking efficiency up to 99.5% and peak conversion efficiency of 98%. Maximizing the energy from solar panels to charge your system. This MPPT Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
EPEVER 40A MPPT Solar Charge Controller 12V 24V Auto, 40 Amp Negative Grounded Solar Charge Controller MPPT Max Input 100V, 520W/1040W for Lead-Acid
EPEVER 20A MPPT Solar Charge Controller 12V/24V Auto Working Max PV 100V Modular Design Solar Panels MPPT Regulator with LED&LCD Display Double USB Port for Solar Home System : Patio
Solar Charge Controller 40A: 12V 24V Auto identifying system volt. Advanced MPPT, with efficiency no less than 99.5% and accurate recognizing and
EPEVER 40amp MPPT Solar Charge Controller 12V/24V Auto, Negative Grounded 40A Solar Panel Charge Regulator w/ LCD Display for 12V/24V Gel Sealed
EPEVER MPPT Charge Controller 40A 12V / 24V Auto, Solar Charge Controller 150V PV Negative Grounded Solar Regulator for Gel Sealed Flooded Battery(Tracer 4215BN) : Patio, Lawn & Garden
Temank EPever MPPT Solar Charge Controller Tracer3215BN 30A 12V 24V DC
EPEVER MPPT 30A Solar Charge Controller, 30 Amp Solar Charge Regulator MPPT 12V/24V Auto Max 100V Input Negative Grounded Controller with LCD
EPEVER MPPT Charge Controller 30A, Max PV 100V 12V/390W, 24V/780W, Negative Grounded, LCD Display Work for Lead-Acid Sealed /Gel(AGM)/Flooded and Lithium Battery Charging(MPPT 30A) : Patio, Lawn & Garden
EPEVERMPPT Solar Charge Controller 10A/20A/30A/40A, 12V/24V AutoTRIRON-N Intelligent Modular-Designed Regulator with PC Software and Moblie APP [Updated Version of Tracer A/an Series] (Triron2210N) : Patio, Lawn & Garden
Temank EPEVER Dual Battery Solar Charge Controller 20A 12V 24V Duo-Battery Solar Controller for RVs Caravans and Boats-New Version : Patio, Lawn & Garden